Assure the pilot is still burning and turn the knob to the “on” position. Turn on the supply line to the gas fireplace.turn the gas control to pilot and hold it in while you light the flame with a match or a lighter.turn the gas control until the “pilot” setting aligns with the mark on the outer rim of the control.
When the fireplace or propane heater is turned on, the pilot light serves as an ignition source for the larger sweep of gas released from the burner.
How to light pilot light on old gas fireplace. How do you check the pilot light on a fireplace? Liquid propane is $1.80 a day = $657 a year. How to light the pilot on a gas fireplace fireplace lighting gas fireplace gas fireplace insert
If gas is coming out of the pilot, but it still won't light, the spark igniter could be the problem. Hold the control knob in for an additional 10 seconds to prevent the ods pilot from shutting off the gas while the thermocouple. This continuous flame is necessary to light large burners such as those found in gas fireplaces.
How to light a gas fireplace pilot light with no ignitor. This allows the gas to reach the pilot assembly. My pilot light will not stay lit gas fireplace gas.
Turn on the supply line to the gas fireplace. The pilot position on a gas fireplace is the position on the fireplace controls that is used to start the pilot flame. You can adjust the flame height by turning the gas key.
A pilot light is a small flame that is kept lit to provide a catalyst for the main burner to be turned on when needed. Natural gas is $0.60 a day = $219 a year. Pull the match or light away when the burner lights.
The average fuel consumption of your standing pilot light is: Light a match or butane candle lighter and hold it near the burner in the fireplace. Move the pilot knob to the pilot position.
Tutorial with step by step instructions on lighting the pilot on your napoleon gas fireplace. Now, while holding the pilot knob in, push the igniter button in once every second until the pilot is lit. How to light the pilot on a gas fireplace gas fireplace.
Here are the how to steps required to manually light your legend valor gas fireplace pilot light.if you're having problems with remote ignition, there’s p. You can adjust the flame height by turning the gas key. Wait 10 seconds, then repeat the lighting process until.
Once the pilot is lit, hold the button down for about 20 seconds until the thermocouple has time to heat up. This means that the pilot flame does not have to be kept on throughout the time when the gas fireplace is on. Sometimes if the gas fireplace pilot light is on but won’t start the fireplace, it can be as simple as a faulty fireplace vent cap.
Turn on the supply line to the gas fireplace. Can i light a gas fireplace with a lighter? The pilot position is typically set on the control dial with either the dial depressed and turned, or used with a separate spark button to light the pilot flame.
This process may take several minutes and several. Relighting your heatilator® standing pilot fireplace video. Because this is the first light of the season, it may take a while for the gas to reach the pilot.
This will allow you to push the knob in, which manually releases the flow of gas to the pilot. Keep trying periodically to light the pilot light. A pilot light is a small flame that is kept alight using a steady, small stream of gas.
Now, it is time for you to light the flame. This video will show you how to light a gas fireplace with a piezo spark ignitor. Turn the gas key to release gas to the burner.
If the pilot light does not engage on the first try, you may have to hold down the knob long enough to purge the air out of the gas line. If the pilot does not light, wait 5 minutes and try again. The pilot should start immediately once the flame is close enough.
This will allow you to push the knob in, which manually releases the flow of gas to the pilot. Hold the gas control button down while you hold the end of a lighted match or lighter at the end of the pilot tube. Pilot light systems are the most common reason gas fireplaces fail to light, so check the main gas valve to make sure the gas is turned on.
Hold the gas control button down while you hold the end of a lighted match or lighter at the end of the pilot tube. Reset the knob to the pilot position: Light a match or butane candle lighter and hold it near the burner in the fireplace.
If the pilot doesn't light, release the gas control knob so it pops back up and stops the flow of gas. When lighting it, you need to hold the button of gas control down, while at the same time you hold the lighted match’s end or hold the lighter at the pilot tube’s end. Remember to do this when you are ready to ignite the pilot light of your gas fireplace.
Continue doing this step until you can start the pilot. Pull the match or light away when the burner lights. The first think you want to do is pull the cover off the fireplace.
While pressing down the control knob in the pilot position, press the ignition switch.